The following content is a guest post. All content and opinions offered in guest posts are solely those of the author. They do not necessarily represent the views of this site.
How to Fix Atomizer Effectively
Guest Post by New Vaping
Vaping is a fun experience that can be enjoyed even in the
most desolate places. But while the brand and type of flavour consumed can have
tremendous effects on the vaping experience, even the vape mod can cut the fun
short. Hence, the need to equip yourself with the know-how on how to fix
atomizers effectively. Contrary to what you might be thinking, you don't need
professional help to fix common mod errors like, "no atomizer",
"atomizer low", "check atomizer", etc. If you pay attention
to the tips provided on this page, you'll be fixing vape atomizers in no time.
Of a truth, vape mod errors are almost unavoidable for
people using regulated vapes. These regulations are there to protect you and
other vapers from vaping accidents or mishaps. Therefore, at some point in your
vaping experience, you are bound to get an error message on your mod. Bearing
in mind that there are different vape brands out there; each with its unique
error messages, the tips provided on this page will be somewhat generic. To fix
atomizers effectively, here are five things to consider.
The Cause of Your Mods' Problem and Solutions
Provided
1. Short and Low-resistant Coils
There are many reasons why you would get this error message
on your atomizer. For instance, the factory-fitted coil may be defective or
bad, or it may not be seated correctly in the atomizer. You can also experience
this error message if the factory coil is missing an insulator or there is a
loose connection on your rebuildable. Human error is also a factor, as vapers
often misjudge the size of their builds. When this happens, the coil will short
out after touching the chamber. In the end, you'll get an error message saying
"atomizer low" or "atomizer short".
In the case of a Low-resistant coil problem, the
"atomizer low" or "check atomizer" error message results
from the bad placement of the coils. If this happens, inspect the resistance of
your coil. Vape mods, in general, are designed to fire at specific resistant
ranges. Thus, if your mod falls short of its resistant range, the atomizer will
not fire.
Tips: In the event of a short coil problem,
check your coil to ensure that it is well placed and it isn't touching the
chamber. If after checking the placement of the coil, it still doesn't fire,
supplant the old coil with a new one and try again. If you are using a
rebuildable, ensure that there is enough clearance between the chimney (top
cap) and the coil and that the screws on the posts are tightly fitted. As time
goes on, the screws may loosen, causing your coil to short out. So make sure to
check the screws every once in a while.
2. Chipset Failure
Like all electronics out there, vape mods have their vulnerabilities.
As such, your atomizer may fail you, even when all its components seem okay.
Hence, the importance of registering your purchases and getting warranties on
your mods. Notwithstanding, at some point in your vaping journey, a mod will
die on you. But If you don't see a need to fix atomizer and it keeps giving you
error messages regardless of how careful you are with the mod, odds are you are
experiencing a chipset failure. This is pretty normal for a regularly used vape
mod. Besides, you don't need much to fix atomizer when you are experiencing
chipset failure.
Tips: While it is possible to fix atomizers
with chipset failure problems, the solution often requires a complete
replacement of the chip itself. However, if you are using a mod whose chipset
cannot be uncoupled from the unit, you may have to replace the entire mod.
Though it is pretty normal to experience chipset failure at some point in your
vaping journey, it is worth mentioning, however, that some devices are more at
risk of the problem than others. Therefore, you must choose your brand
carefully when shopping for a vaping device or mod. We recommend going online
to conduct research on the company and the reliability of their products before
making a purchase. Disgruntled customers, in general, don't keep quiet about
their bad experiences with devices or brands, so make sure to read all the
company's bad reviews before making a purchase.
3. Insulator Damage
If you are experiencing the "atomizer short"
error or a similar error in your mod, there is a high probability that the
fault is from your insulator. These days, vaping brands include PEEK insulators
in the engineering of their atomizers. This piece of tech is to prevent mishap
for vapers by creating a vacuum between the positive and negative. On the off
chance that the insulator gets damaged or becomes ineffective in separating
negative from positive, it may cause the coil to short out. When this happens,
the "atomizer short" error will appear on your mod urging you to fix
atomizer.
Tips: To fix atomizer, you must, first of all,
determine whether your mod insulator is in good shape or not. While the
insulator positioning may differ from brand to brand, the more generic devices
have an insulator at the 510 pin. Gently disconnect the 510 pins from the mod
and inspect the insulator for damage. The insulator may become ineffective if
there's a crack on it, so make sure to look for cracks in your inspection. On
the off chance that your mod is the rebuildable kind, you should remove the
positive post to get a good look at the insulator. If everything is as it
should be, then your error message is not insulator related.
4. Mods' 510 connection
For a number of reasons, some 510 pins are not well
connected to the post. Sometimes the problem comes from below-par products.
Other times, it's because a faulty 510 gets past unsuspecting quality control
officers. Furthermore, mods' 510 connection errors can result from the 510 pins
being too shallow or deep, or the manufacturer using poor grounding technic, or
other factory-related errors.
Tips: To fix atomizer when the 510 connection
is in question, is not the easiest task on earth. It requires expertise that
you may not have. Unless you know how to fix atomizers by modifying 510 pins or
replacing them, you should supplant the atomizer with a new one. Essentially,
510 pin lengths differ from atomizer to atomizer, so if your 510 pin doesn't
fit your mod, a new atomizer may suit it better.
5. Mod Damage
Mods are highly susceptible to misuse and abuse, and owing
to the number of mods that we have in our hands per time, the damage is almost
unavoidable. Suffice to say that you should take proper care of your mods and
vaping devices. But there are still a few remedies to explore before giving up
on your damaged mod if the worst happens.
However, if you are going to fix atomizers with such
drastic problems, you must understand how those problems occur in the first
place. Here are several reasons why you may need to fix atomizer for mod
damage.
Dropping the mod; Mods are very delicate. As such, you must
take care not to drop them. If you do, you may cause possible damage that will
come back to haunt you in the future.
Overtightening atomizer: While you may be tempted to
overtighten your atomizer to prevent leaks and damage, you should go easy on
the tightening. Because you'll be doing more harm than good to the delicate
mod.
Juice in the mod: Sometimes the atomizer gets leaky. Thus,
dripping fluids into the vent holes, 510 pin post, and chipset. This can cause
damage to the mod.
Tips: The best fix for mod damage is to take
good care of your mod. Because you'd have to supplant the mod with a new one
once it gets damaged. Even if you succeed in salvaging the damaged mod, you'll
be putting yourself at risk each time you vape.
Conclusion
To reduce the chances of damage to the barest minimum, you
must take proper care of your mods and register your warranties on all
purchases.
About the Author
NewVaping is a leading online vape UK shop that offers various vaping hardwares, vape kits, e liquid, replacement coils, vape tanks, vape mods, pods,