Review of Geekvape Mero AIO Pod Kit | New Vaping
The team at Newvaping.com very kindly sent over their new addition to their extensive range of AIO (All-In-One) devices, the device was sent out free of charge, for the purpose of this review.
AIO and pod devices have been growing in popularity over the last 12 months, and Geekvape have been at the forefront in product design.
Description
The Geekvape Mero AIO Starter Kit comes with stylish and simplistic appearance. Geekvape Mero AIO kit is powered by 2100mAh built-in battery with Type-C charging. And Mero AIO kit features 3 adjustable output: Low white, Med blue, High green. Geekvape Mero AIO cartridge maintains 0.4ohm/ 0.6ohm Geekvape B Series Coils and adopts adjustable bottom airflow intake to provide MTL & DTL flavour. Geekvape Mero AIO is compatible with 510 tanks by 510 Adapter(sold separately).
Package Content:
1x Mero AIO Kit
1x Geekvape B Series Coil (0.4Ω, 25-33W)
1x Promotion card & warranty card
1x USB cable (Type-C)
1x Coil tool
1x User manual
Main Features of Mero AIO
Geekvape B Series Coil
Support MTL & DTL flavor
Adjustable bottom airflow intake
Compatible with 510 tanks by 510 Adapter
Mero Specifications:
Dimension: 81.6mm (h) x 23 mm (w)
Battery capacity: 2100mAh
Capacity: 2ml
Output power: 3.2V/3.5V/3.8V
Maximum output voltage: 4.2V
Charger specification: Type-C USB 5V 1.5A
Low voltages warning: 3.2V±0.1V
Standby current: ≤15uA
Working temperature: -10~45℃
Maximum vaping time: 10s
Filling mode: Top Filling
Three output: Low White, Med Blue, High Green
Resistance: Geekvape B Series Coil 0.4ohm(25-33W)
The Geekvape Mero AIO comes in a choice of colours.
Newvaping.com will have you covered when it comes to the Mero, as they stock all Mero accessories and supplies, from replacement Geekvape B Series coils, and Mero Pods, through the optional Mero Tank and 510 Adaptor.
Quick Links:
GeekVape Mero 510 Thread Adapter
Geekvape Mero Empty Replacement Pods
Build quality and design.
The Geekvape Mero is quite a stylish little device, and seems to take design ques from a mech mod, with nice detailing around the top of the device and on the base plate.
The Mero doesn’t have a display, so any device info needs to be established through the colour coded lED light around the fire switch.
⚡️Out put Power setting.
Pressing the fire button 3 times in quick succession allows you to adjusted the power output.
- ⬜️ White = Low power 3.2 volts.
- 🟦 Blue : Med Power 3.5 volts
- 🟦 Green = High Power 3.8 volts
🔋Battery Status Indicator
The Mero comes with a preinstalled 2100 mAh, When Vaping, the LED will indicate the remaining battery life.
- 🟥 Red = 0-30%
- 🟦 Blue = 31 to 70%
- 🟩 Green = 71 to 100%
🔌 Charging Status.
Whilst the device is plugged in, the LED will display the charging status.
- 🟥 0-70% = Breathing red light.
- 🟩71-99% = Breathing Green Light
- 🟩 Fully Charged = Still green light
Status Indicator
Lastly the LED indicator will feed back to the user status and safety information
- Low Battery - Red light will flash 5 times (3.2V±0.1V)
- No Atomizer - Red Light will flash 3 times.
- Atomizer Short - Red Light will flash 8 times
- Output time out - when single output exceeds 10s , the red light will flash 3 times
- Over Heat - Red light will light up for 10s, when the device overheats.
That’s a lot of information to try and process through one LED. Personally not a massive of of style of information feedback, and would have just fitted a small screen.
The square fire button is set in the LED ring, and has a nice clicks action.
Tank / Pod
The pod or tank section of the Mero, is very cleverly designed, actually has the airflow control built into the base of the pod, and allows you to adjust the airflow by simply turning the pod a quarter turn. The pod it’s self is held in place with a couple of plastic lugs on the plastic. To be honest not sure how long this will last before the lugs wear off.
Pleased to see that the fill port is located on the top of the pod, hidden in the shoulder section of the pod.
There is a tiny cut up, which allows you to hook your nail under and pull up the rubber plug, which has a built in retainer, as it sort of unwraps around the mouth peace.
There is a good sized hole, although you may struggle to fit a chubby style tip in to fill it.
Coil
The Mero comes with only one coil, (come on Geekvape at least supply a couple of coils,j The Geekvape B Series Coil has a standard resistance of 0.4ohm and is designed to run at between 25-33W. The coils simply press fit into the Botton of the pod, and for removal, you can use the coil tool, that comes in the kit, which you can use to pry it out.
Unfortunately I made a rookie mistake when I first installed the coil, not realising the device was on, I accidentally pressed the fire button, whilst playing with the air flow, and generally checking it out, managing to completely burn out the coil, as I hadn’t filled up the tank, or primed the coil. So couldn’t really test out how well the B Series Coils work, or taste like. As once I had filled it up with juice, it just tasted of burnt cotton.
Charging ⚡️🔌
The Mero AIO is charged using the supplied Type C charging cable, which plugs into the type c port on the side on the device.
👍 Positives & Negatives 👎
Positives 👍
- Looks uncluttered and well made.
- Adjustable Airflow.
- Can used the Geekvape B Series Coils.
- Has the option of a 510 connection
- Comes in a choice of finishes and colours.
- Good Value.
- Good battery size
- No leakage issues
Negatives 👎
- No Screen.
- Complicated LED function.
- Pod only press fitted.
- Only comes with one coil.
- 510 Adaptor is not included.
Final Thoughts 💭
If you looking for a pocket friendly All in One Device, with the option of installing your standard 510 tanks, using the 510 Adaptor, then the Mero may fit the need. Personally I was overly taken by the Mero, and didn’t think that it was up to normally high Geek Vapes standard, can’t get on without a screen, and found the pod attachment a bit strange.
If you want to check it out for your self then head over to newvaping.com and follow the link below.
https://www.newvaping.com/products/geekvape-mero-aio-pod-kit