The team over Vape Store UK very kindly sent out the New Innokin Smartbox starter kit, free of charge for the purpose of this review.
Reverse Polarity Protection - The Aethon chip set is protected against you inserting the battery the wrong way round, and won't fire.
15 Second Cut Off - the device will stop firing after 15 seconds of continual use.
Low Voltage Protection - the indicator light will blink 8 times when the battery is below 3.3v and the smart box will power off.
Short circuit Protection. - will stop the device firing in unsafe conditions, resulting from a short circuit within the atomiser.
The Innokin Smart Box, come in a choice of five striking colours.
The kit comprises of two main components, the atomiser Isub Tank and the Smart box.
The Smartbox measuring in at on 71mm tall, is quite dinky compared to along of kits on the market.
The Smart boxes minimalistic design has no screen or control buttons, apart from the fire button, and LED indicator' and is perfect for the new vapor,looking for a more simple Vaping experience.
The top of the device is chrome plated measuring 23.1mm x 41.1mm, and features a brass spring loaded 510 connection.
The base of the device has matching chrome plating, with the threaded battery screw on battery cap, that has a nice level of knarling around the edge to allow easy access to the battery compartment,
The body of the device is wrapped in a seemless colour coded alloy casing, that has an almost metallic Flec finish.
The button located on the leading edge of the device, finished in brushed alloy, with a cut out of the Innokin logo, has a nice positive click to it, and lights up, acting as a battery indicator.
When the battery is fully charged it Innokin logo LED will glow green,at half power yellow, and red when charging is required.
The device can be turned on and off, by pressing the fire button three times. In quick succession. It is always recommend that the device is powered off, when not in use, or being carried in your pocket or bag.
At the bottom of the leading edge below the fire button, is the wattage indicator, which illuminates to indicate the coil type installed.
White light - DTL ( Direct to lung) : with the 0.5ohm coil
Green Light - MTL (Mouth to Lung) with the 1.2ohm Coil
The kit includes the impressive iSub Tank, with the 0.5ohm coil pre-installed, along with two spare Coils.
The isub tank can easily be broken down into its component parts for maintence and cleaning, by simply unscrewing the the top section and removing the glass.
The isub tank is cleverly designed with a spill proof coil change system, which allows you to switch out the coil without getting juice on your hands, you simply unscrew the airflow control ring, and pull out the coil from the base of the tank.
The isub Coils feature an effective spit back guard, the wire mesh, prevents eLiquid spitting up the mouth piece.
The isub tank features fully adjustable air-flow to suit all styles of Vaping. It is adjusted by rotating the airflow control ring at the base of the tank.
How does it perform?
I was quite impressed with the Innokin Smart box, it performed surprisingly well, delivering a nice satisfying amount of vapor, and it delivered it consistently through out the Vape.
With the preset wattages, the battery seemed the last for ages and will easily last you all day.
I found that the 1.2ohm mouth to lung coil, produced an impressive amount of flavour, to satisfy even the flavours chasers amounts us.