Coil Master Ceramic Sticks

 


The team over at Coil Master are always working hard to come up with new ways to make Coil Builders lives easier, helping us to build better and better Coils, and therefore have a better vaping experience.  And have become the market leader in Coil building accessories.They very kindly sent out a set of Ceramic Sticks free of charge to try out and review.

They are described on the Coil Master Website as follows:
Coil Master Ceramic Stick is made of Zirconia ceramic,which allows users to maintain and adjust their coils while dry firing.

5 sizes ceramic rods are included in one pack: 2.0, 2.5, 3.0, 3.5, 4.0mm.


Keep and adjust coils in perfect shape while dry firing.

A silicone grip to prevent finger burns.

 
Packing:

1 x Black Silicone
5 x Zirconia Ceramic Rods 
5 x Black Silicone Grips


Specification:
Manufacture : Coil Master
Material : Zirconia ceramic & Rubber
Length : 60mm
Diameter : 2.0, 2.5, 3.0, 3.5, 4.0mm

The Ceramic rods, come very neatly packaged in a matching black Silicone carry case,  with each rod, cleverly held 
securely in place.

 

Each rod can easily be pulled out by either simply pulling the rod out of the end, of by lifting them upwards, out along the 
 pre-cut slots. Which I found the best option.

 

Each of the black Ceramic rods, has a tight fitting Silicone rubber grip handle, which insulates the rod, allowing you to hold
 the rod without burning your fingers as the coil heats up.

 

If needed the rubber grip can simply be pulled off should it be needed.

 

Each stick is clearly labelled, on the rubber grip, showing the shaft diameter, ranging from 2.0, 2.5, 3.0, 3.5, 4.0mm.

 

Means no your standard sized Coils will fit perfectly onto the rod, allowing you to use them for wrapping and installing.

 

Allowing you to work with the smaller 2.0 nano Coils all the way up,to the 4mm fat boys.

 

The main stand out feature of the rods, is the fact that they are made of Zirconia Ceramic, which means that they can be used to dry burn your Coils without the risk of shorting them out, as you would with a standard metal rod.

 

 

Real world performance.
The ceramic rods, are a must have for all coil builders, and perfect for dry burning and setting you Coils.

 

Allowing you to correct and straighten the coil, whilst your pulsing it. Plus I found the great for cleaning out the inner surface of the coil, cleaning out any charring,

 

It's compact size means it's a perfect addition to your Coil building kit. 

Conclusion,
Highly recommended addition to your coiling kit, put a set on your shopping list.