The Wotofo Profile RDTA Review.

The Wotofo Profile RDTA by Mrjustright1 - One Product Two Devices.


The team over Wotofo were  kind enough the send over a couple of the new Profile RDTA’s free of charge for the purpose of these reviews.


I haven’t used an RDTA in absolutely ages, and only then was a cotton feed device, so was super excited to try out the new a Profile with its metal rod wicking system.


Introduction to the Profile RDTA.


Wotofo x Mrjustright1, THE PROFILE! Yes, we’re now introducing to you our new Profile member, the Profile RDTA! Being the RDTA version of the popular Profile RDA, the Profile RDTA is sure to live up to you flavor chasers’ expectations. It improves RDTA juice transfer from bottom to top by using 4 stainless steel wicks, and it can be used with single wire coil setup, dual wire coil setup and mesh coil of course. The most exciting news is that we are proud to announce our new breakthrough mesh strip here.


The Profile RDTA is the perfect device for someone who is looking for a versatile Atomiser, if you can heat it, and vape it, you can probably do it with the Profile. Cover both Mesh and Standard Coils, as both a regular RDA (Rebuildable Dripping Atomiser) and a RDTA ( Rebuildable Dripping Tank Atomiser)


  • RDTA -Mesh Coils
  • RDTA – Dual Regular Coils
  • RDTA – Single Regular Coil
  • RDA – Mesh Coils
  • RDA – Dual Regular Coils
  • RDA – Sinlge Regular Coils
  • RDA Botton fed – Mesh Coils
  • RDA Botton fed – Dual Regular Coils
  • RDA Bottom fed - Sinlge Regular Coils


Inside The Box (you get loads)

  • Profile RDTA/RDA
  • nexMESH Clapton Ni80+A1 0.20 ohms x1
  • nexMESH Extreme A1 0.16 ohms x1
  • nexMESH Turbo A1 0.13 ohms x1
  • Framed Staple Clapton Ni80 0.33 ohms x2
  • 6mm Thick Cotton Strip x2
  • 3mm Thick Cotton Strip x2
  • Stainless Steel Wick x6 (4 pre-installed + 2 spares)
  • Mesh Bending Tool x1
  • RDA Base Adapter x1
  • Cross Head Screwdriver x1
  • Allen Key x1
  • Accessory Bag x1
  • User Manual x1




Specs & Features

  • Diameter: 25mm
  • Height: 52.7mm
  • Build Deck Diameter: 22.5mm
  • E-Liquid Capacity: 6.2ml
  • Coil Types: Single Mesh Coil, Single Wire Coil, Dual wire coils
  • Drip Tip: Removable Coloured Resin / 810
  • Filling Method: Mid filling for RDTA / BF squonkable for RDA
  • Airflow: Adjustable Side Honeycomb Airflow
  • Connection: 510


The Profile RDTA comes a a choice of 6 Colours.




With a selection of contrasting drip tips, to finish off the look.





The Wotofo Profile RDTA Build & Design.


The Profile, comes full assembled in RDTA mode, and can be easily broken down, for maintenance and cleaning.




RDTA 510 Connection.

The base of the device, features a standard gold plated 510 connection, surrounded by Wotofo branding. 




The base of the RDTA is made up of the tank section, 25ml in diameter, and holds a massive 6.2ml of juice, in a PCTG tank section, surrounded by a framed cage, not only to add to the overal look, but does a good job of protecting the tank from breakage. Which will be an issue as no spare tank included in the kit, so be carefull.




The 510 connection runs up through the center of the tank, and features a female 510 connection, to allow the RDA section to thread on.




Wicking Rods.

Most other RDTA tanks I have used in the past have relied on cotton poked down into the tank to wick up the juice. The profile on the other hand uses stainless steel rope for its automatic Eliquid transfer system.





Apparently very popular in Germany, this kind of stainless steel wick is in rope shape. It has super strong wicking capability to take e-juice from the bottom of the tank up along its length efficiently and gives automatic juice supply to the cotton. This e-liquid transfer method makes large tank capacity viable in reality and cuts the hassle of frequent refills.


The Profile Build Deck.


The very clever design of the multi section construction of the profile, effectively gives you a build deck, that turns into a standalone RDA.





The build deck itself has a 510 connection build into the base, with the choice of either the preinstalled squonk pin, or standard solid gold plated 510 pin.






 Along with the 510 the base of the deck has 6 other holes, 2 holes either side of the 510: which the wick rods slide through, along with a two more holes on either side, the larger hole, for filling, and is the perfect size for 10ml juice bottles, and just about copes with 50ml bottle nozzles. You just won’t be able to use your dropper bottles, so will need to decant it.




The other hole is an air hole, and prevents airlocks and vacuums forming in the tank when filling.


The deck itself smoothly threads down onto the tank section, just make sure that the O-Rings running around the underside of the deck remains in place, as will prevent any leakage.


The Profile deck, isn’t just a mesh desk, that you can fit standard coils into, it has actually been designed, with both in mind. 




So you have two Philip head screws located on either side, which when unscrewed will loosen the mesh clamps, unfortunately they are not spring loaded, and only seem to have a short amount of travel, so don’t unscrew them to much, or you will have to fiddle about getting them back in.


Either side of the mesh-clamp screws, are two more slightly smaller Philips head screws, which open up the post less coil holes located underneath the spring loaded ceramic cotton tray. So you can effectively install either a single or dual coil build, fairly effectortly. Depending on what you fancy at the time.


The Top Cap & Airflow Controll.

The top cap on the Profile is a complete work of art, and I’m not talking about the Profile branding on the side of the tank.






You have 19 small hole located on either side, which can be closed off, by rotating the upper section of the top cap.






The staggered edge of the airflow controlling top cap, allows you to eith close off the lower section of holes, one at a time, or you can close off a complete column at a time, by turning around to the taller section.








The two tabs located inside the chamber, are there to help prevent leakage by closing off the fill and airflow holes. Nice attention to detail.




You will also notice that the chamber wall has been machined so that it will lock into place, when installed over the deck section. To allow yo turn the airflow, with twisting the deck.


One you first open the box to airflow ring is very tight, so it is worth running some juice around it, to loosen it up.




They have also machined the inside of the top can, in a chamfered, which is believed to enhance flavour quite a lot.


RDTA or RDA Conversion.

As we stated at the beginning of the review, you have the option to run the a Profile in either RDTA mode, or stripped back to a simple RDA.  




This is done by simply unscrewing the tank, and then screwing on the conversion bottom plate, which seals off all of the unrequited rod, and fill holes. Converting it into an RDA, which can then be used in either squonk mode, using the preinstalled Squonk pin, or switching it out for the solid pin. And using it as a standard drip per.




The Profile RDTA Builds.

The Profile RDTA offers the widest selection of builds that I have come across, and true builders delight. And the really nice thing is the kit comes with everything your going to need.


Mesh Builds.

Within the kit you get three types of mesh to build with.








NexMESH Clapton (Ni80+A1 0.20 Ohms)

Let us introduce the nexMESH Clapton mesh coil now, the Claptonized mesh or the mesh-style Clapton you could say. Creative meshing with quality wire, more contact surface for e-liquid, and mixed Clapton heating features, all of these just make the nexMESH Clapton a unique bad boy for huge vapor and amazing flavor.

Performance: Huge vapor and amazing flavor.




NexMESH Extreme (A1 0.16 Ohms)

nexMESH Extreme is the refined woven wire mesh derived from the original wire mesh. Its secret resides in the accurate usage of wires. Flavor production can vary drastically with tiny little difference in mesh patterns including the weaving, the crimping, the spacing and the wire. To further help understand what power nexMESH Extreme has, we’ll use an analogy: nexMESH Extreme is to mesh as complex Clapton is to single-strand coil. In essence, nexMESH Extreme offers larger coiling surface area, in a micro way, than normal mesh strips, thus increases vapor production and enhance flavor production.

Performance: Robust and strong, a vigorously warmer flavor experience, heavy vapor production.




NexMESH Turbo (A1 0.13 Ohms)

nexMESH Turbo is the high-density perforated mesh strip similar to nexMESH Chill. It offers a faster ramp up time and provides large contact surface to the e-liquid. The result? More vapor with more possibilities to taste more notes in e-liquids within lesser time.

Performance: Bold and clear, a more heightened flavor experience, thick vapor production.


To prepare for the install, after choosing which Mesh you wish to use, you need to shape the mesh, this is done by carefully rolling the mesh over the Wotofo bending rob, which gives the mesh the perfect curve.






Once the mesh has been curved, it will literally drop into the pre-loosened clamps. Which can the be carefully tighten up, to secure it in place.


Then it is worth dry heating the mesh, to ensure you burn off any oils, and get rid of any hot spots.





You can then wick her up, using the thicker 6mm Cotton laces, which is worth rolling through your fingers, to remove any kinks or excess cotton. Then it is just a matter of careful lint threading it through the coil arch, whilst pressing down on the ceramic cotton tray, which will ensure that the cotton, is constantly pressed up against the coil, to prevent flair  ups, and dry hits.




Then it is just a matter of trimming and combing the cotton, and getting the balance right, with out compressing the cotton to much. And allowing the juice to wick up off the ropes.


Clapton coil Build.

The deck allows you to install either single or dual coils.


Simple trim the coil legs to about 5.5mm, back out the screws, and drop the coils in place. Then it’s just a matter of straightening the coils, making sure they don’t touch each other.






Then wick using the 3mm laces supplied, and trim off inline with the edge of the build deck. Comb out, and trim the top, before tucking the cotton down so it is just touching the top of the rope.




Single coil, works in the same way, apart from you have more room for coil placement, and easier to wick.


Vaping, Performance & Flavour.

I must admit I was a little sceptical when I first opened the box, and found the small metal ropes, and was unsure if they would be able to feed the juice hunger mesh coils.





Single Coil setup.

I started out vaping on the Profile, with just a single coil, and I super impressed. And instantly remembered how good the flavour is on RDTA’s. The single coil performed faultlessly, delivering just the right amount of liquid up through the ropes to feed the coils.  The Clapton coils produced a great amount of flavour, with plenty of vapor, inline with a single coil. No dry hits. The perfect vape.


Dual Coil Setup.

As with the single coil the dual coil setup delivered super flavour, with a little more warmth, coming up off those coils. Wicked well, but did seem to suck through the juice twice as quick, which you would expect.


NextMesh Setup.

Is used the Clapton Mesh for this review, having tried the standard before. I vaped it between 50w and 70w, at 50w it vaped really well with buckets of flavour, with a steady flow of juice coming up. As I moved up to 70w, as the wattage increased, so did the flavour production, but I did find that the cotton began to dry a bit, I think I need to have a play with the wicking and cotton placement, and thin it out a little, as it is a large amount of cotton to feed.


Final Thoughts, Positives & Negitives.

I have been super impressed with this RDTA, and it has restored my faith in Mesh builds, and allowed me to fall in love with RDTA again.




I so impressed with how they have managed to design and create an RDTA that performs so well, with so many different types of builds, normally you end up with a dual coil deck, that allows you to stick a single coil it, but never really works, let alone perform so well with mesh coils. Such a great design.




I just hope that Wotofo build a Side-By-Side mod for it, that would allow you to soak up some of that towering height, which is my only niggle. I have looked at a suitable Side-By-Side Mod, but none of them will take a 25mm Atty. so fingers crossed that Wotofo will bring out a Profile Side-by-side Mod to match its style and size, and to make it more pocket friendly. A 21700 Mod eould be perfect.


Positives 👍

  • Transforms between RDTA and RDA
  • Handles all types of builds.
  • Great adjustable airflow
  • SS Rope Wicks well
  • Large Juice Capacity
  • Easy build deck.

Negatives 👎

  • Too Tall
  • Clamps not spring loaded.


Head over to Wotofo today and use Discount Code WTFF90 for 10% Your Site wide purchases.


Earn Money From You Blog Join Share-A-Sale

Popular Posts

The New Geekvape Aegis Boost Pro Kit Review

Ripe Vapes VCT - Vanilla Custard Tobacco Premium E-Liquid

Ripe Vapes VCT ~ BOLD from Velvet Vape.

Ripe Vapes E-liquids

Labels

guest post23 RDA22 Starter Kit19 Digbys17 ecig starter pack16 doozy vape co15 accessories13 vape distrubution13 Smokey Joes12 Ecig11 doozy vape11 heaven gifts11 Red Vape10 decadent vapours flavour10 dispergo vaping10 ejuice world10 vapeclub10 Dripper9 diy ejuice9 geek vape9 limited edition9 new vaping9 riot squad9 augvape8 vaporz8 Cotton and Cable7 ejuice; ejuice reviews7 gq vape7 grey haze7 love vaping7 vandy vape7 cult vapour co6 jack rabbit vapes6 smog craft6 uk ecig store6 13 Sins5 Battery5 POD5 alchemist cupboard5 apollo5 chubby5 diamond mist5 juice bomb5 vapeium5 RBA4 black bamboo4 cable4 cafe vapour4 cotton4 dinner lady4 e-cigarette4 ecigwizard4 evil cloud4 galaxy vape4 generals juices4 getvape4 ivg4 mountain oak vapors4 ripe vapes4 rochford project4 vape classique4 vape craft inc4 velvet vape4 yogg lyfe4 C.R.E.A.M3 E-Cigarette Direct3 Review3 Stella Blues Vapors3 Vape Store Review3 aisu3 aureum vape co3 bearded freaks3 button junkie3 cigarette direct3 cloud patrol3 coil master3 colonel booms3 cosmic clouds3 electronic cigarettes co3 element3 goldleaf drip3 hand picked vapes3 heaven knows3 high limit vapor3 ijoy3 juiceshop3 kangertech3 koncept xix3 limitless3 lost fog3 manabush3 oz premium liquids3 punk juice3 rdta3 really electronic cigarettes3 shake vapes3 sigelei3 slam city vapes3 smok nord3 sugar pie vapes3 tablites3 trump it3 vampire vapes3 vape club3 vape superstore3 vapes city3 vaping hamster3 vaping outlaws3 vapor establishment3 yogg3 zombie squash3 Bonnie and Clyde2 DSRT2 Lifesstyle2 Vapestoreuk2 aegis boost2 apache vape2 asvape2 ave402 brews bros2 craft liquids2 custard2 custard range2 demon vapour2 diamond heights vapour2 dinner lady fruits2 dispergo2 dovpo topside2 evapo2 ezy vape2 freemax2 fruit flavours2 gemma allen2 gemma allen signature2 general juices2 halo2 hobo juice2 ineliquids2 innokin2 ivg mixer2 lazarus vintage2 liquid heaven2 liquid state2 loaded2 money shot2 nasty juice2 nata liquids2 nom nom2 ohm baked2 ossem2 oz liquids2 pods2 rachael rabbit2 ravens cut2 rs vapours2 rude oil2 ruthless vapor2 shake2 simply eliquid2 soul vapor2 squid inc2 sub ohm2 vape boy2 vape diva2 vapemaven2 vaper treats2 vaporworks2 voopoo2 wick liquor2 wotofo2 zap2 zap juice2 Clearimizer1 Due Time1 E-cig Case1 Kylin1 PREVIEW1 SMOK1 Subscriptions1 Vaffle1 Wise Guys Ejuice1 aspire1 augvape druga1 baccy roots1 baked blueberries1 banana1 batteries1 blu1 blu pro1 boost plus1 breakfast cereal1 butterscotch1 caledonian vapes1 cheap thrills1 chilled vibes1 christmas1 christmas cake1 closed pod1 cloud batter1 cloud vapor1 cloudy rooms1 coil art1 coils1 convicted vapes1 creamy vanilla1 cupcake man1 custard company1 custard connoisseur1 cuts ice1 cyber rabbit1 deliquids1 demon vaper1 dessert inspired1 diamond heights1 digiflavor1 djinni range1 dna 751 donut vape1 doozy vapes baccy roots1 drippin1 euro vapour1 fallstreak1 fantastic flavours1 flavahub1 flavour boss1 fog monster1 freemax maxus1 gavewang vape1 geekvape zeus1 gemm pod kit1 gloop1 gotcha range1 halcyon haze1 halo vapour co1 harmonic labs1 heisenberg blend1 heisenberry1 hexa1 home baked1 hula1 humo1 inhale eliquid1 innokin smartbox1 interview1 ivg mixer range1 jac vapour1 jeffries vintage1 johny1 juice junki1 juicebox1 king1 king of vapes1 koi range1 lenola cream1 lost vape1 malaysian1 market vapor1 marquee vape1 medusa juice1 milky moo1 mish mash1 monsta vape1 moreish puff1 mt baker1 naturally extracted1 new vaping ; batteries ; 186501 nimbo mods1 old ohmies1 old ohmies custard1 oxva1 peanut butter1 pod mod1 premium ejuice1 pulse1 pulse rda1 purple syrup1 rdta box1 reeper tank1 reserva range1 rta1 smokeyjoes1 strider1 the flavour factory1 therion dna1 vandy vape pulse1 vanilla custard tobacco1 vanilla donut1 vape1 vape by post1 vape dis one1 vape empire1 vape expo1 vape news1 vape sales uk1 vape store1 vapornator1 vapour1 vct1 velocity1 vendor Showcase1 vice precedents club1 vinci range1 volt energy1 voopoo vinci1 wild bunch1 wonutz1 wotofo serpent1 wrapping1 z-squad1 zapwrapz1 zombie juice1
Show more