Geekvape Zeus Nana Tank Review.
The team at Geekvape very kindly sent over the latest edition to the growing Zeus tank family, the All-new Zeus Nana.
Combining the elements from its predecessors, Zeus Nano incorporates a high dynamic top-to-bottom airflow with excellent leakproof design, combined with outstanding Geekvape B Series coil engineered to provide the flavor satisfaction you deserve.
The Zeus range have been around for a long time now, and over the years Geekvape have managed to perfect the top air flow. Leak proof design. Which was first previewed in the Zeus Single Coil RTA, with the design translating over to a number a sub ohm tanks. And now finally paired up with the outstandingly good G.Boast Coil, following on with the pledge that Geekvape made to make all new products compatible with these core Coils, allowing customers to easily switch between products without having to interest in new c oils.
GeekVape Zeus Nano Tank Specification:
- 22mm Diameter
- 2mL Tank Capacity
- Superior 304 Stainless Steel Tank Construction
- Threaded Top Fill System
- Geek Vape Boost Formula G Coil Series
- 0.4ohm KA1 Mesh Coil - rated for 15-25W
- 0.6ohm KA1 Mesh Coil - rated for 25-33W
- Press Fit Coil Installation
- Dual Slotted Top Airflow Control Ring
- Threaded 510 Connection
- 510 Drip Tip
The Zeus Nano comes in a choice of 6 striking colour to choose from.
Black, Blue, Gold, Gunmetal, Rainbow and Stainless Steel
GeekVape Zeus Nano Tank Kit Includes:
- 1x GeekVape ZEUS Nano Tank
- 1x 0.6 Ohm Kanthal Meshed
- 1x 0.4 Ohm Kanthal Meshed
- 1x Replacement Silica Glass
- 1x Coil Removal Tool
- 1x Pack of Spare O-rings
- 1 x Bubble Glass.
- 1x User Manual
The Geekvape Zeus Nano comes fully assembled, but can be easily be broken down for cleaning and maintenance, by simply unscrewing the base section, removing the coil, and carefully sliding off the tube.
Once the top cap has been removed, you can then also slide off the air flow control ring.
The base section features a standard 510 threaded connection, measuring 22ml across, it will fit neatly on all of your mods, even some of the slimmer, smaller ones, such as the Geekvape Boast Plus, fitted with the addition 510 convention plate.
Surround the 510 connection, is the usual Geek vape branding. With ZEUS at the top, made in China, with the serial numbers and designed by Geekvape,
Zeus Nano Coils.Once the base section has been removed, you gain access to the coil base, which has been preinstalled, with the included G-Boast Coils, which are simple press fitted.
The base of the coil sits proud from the base of the tank, to allow the airflow to run down, across and up through the coil, to deliver the very best level of flavour.
For those of us, without finger nail, Geekvape also include the spanner shaped Coil removal tool in the kit, which allows to to easily remove the coil, by simply getting up under the edge, and prying it out.
The Coils included in the kit. Are the tree and tested G-Boast Coils, which first arrived in the original boast Pod System. And now come in a wide selection of coil types and resistances. And deliver an amazing level of flavour.
Zeus Nano Airflow
The Zeus Range are renound for the leak proof design, this is in part due to the location of the Airflow enters, which is located above the ejuice tank.
The single slot on each side of the ACR directs the airflow, in and down through the wall of the chamber, and then up under the coil. Although promoted as a MTL (Mouth To Lung) Tank, I found the airflow far to wide open, even with the airflow completely shut off. When it then delivers a loose MTL draw.
The ARCring is nicely branded with the engraved ZEUS name. Which due to its deep engraving, gives you plenty of grid when adjusting it. From the fully open stopper, to the fully closed off.
Top Cap Juice Fill.
The top cap has deep cut outs around it, making it easy to grip and turn, allowing you to give it a traditional Zeus Quarter turn to unscrew the top cap.
Once the top cap has been removed, it exposes the two kidney shaped, relativity small fill ports. Which in my opinion could have been a bit bigger, as you I even found that straight needle tips on chubby bottles where to big, which just meant you had to be a bit more carefull when you fill up the tank.
The Zeus Nano comes with the option of installing the Bubble glass which increased the tanks capacity from 2ml to 3.5ml. You can simply slip off the standard glass, taking care to make sure that all the o-rings are back in place, and swapped on the new glass, and then just slip it on, the first time, if new it’s worth rubbing some ejuice around the edge, to get it to slip on easier.
Personally I prefer the standard glass, as I tend to find the bubble glasses tend to get knocked and break easier. But that is just clumsy old me. But it is great to have a spare glass.
Design & Build Quality.
I have always been a big fan of the Geek Vape products, especially the Zeus range of Tanks. And the Nano is no exception. And is another well designed, well machined tank. And think it looks stunning in the Rainbow finish. The design on the Nano, seems to have given the Zeus a slim down, and a more narrower, taller design. This slim look is extenuated by the sloped top cap, and the taller drip tip. All combining together into a classic design. Whilst keeping the Zeus DNA running through it.
As you can see the Zeus Nano, has the same cut out notches around the base, and the top cap. Along with the same standout Zeus logo etched onto the inner chamber.
- Great build quality.
- Uses the G-Boast Coils.
- Choice of tank sizes.
- Great flavour.
- Narrow tank, to fit some of your smaller mods.
- Not true MTL Tank.
- Quite a tall tank for only 2ml.